how to finish a table runner with points?

To finish a table runner with points, you can follow these steps:

1. Cut the fabric for the table runner to the desired length and width.

2. Fold the fabric in half lengthwise, with the right sides facing each other.

3. Sew along the long edge, leaving both ends open.

4. Turn the fabric right side out and press it flat.

5. Fold the ends of the table runner diagonally to create a point. Adjust the angle of the fold to your preference.

6. Pin the folded ends in place.

7. Sew along the folded edges to secure the points.

8. Trim any excess fabric from the points.

9. Turn the table runner right side out again and press it flat.

10. Finally, topstitch around the entire table runner to give it a finished look.

By following these steps, you can create a table runner with neatly finished points.

1、 Mitered corners: How to finish a table runner with points

Mitered corners: How to finish a table runner with points

Finishing a table runner with points can add a touch of elegance and sophistication to your dining table. One popular technique for achieving this is by using mitered corners. Mitered corners create a clean and seamless finish, giving your table runner a professional look.

To start, measure and cut your fabric to the desired length and width for your table runner. Once you have your fabric ready, follow these steps to create mitered corners:

1. Fold the fabric in half lengthwise, with the right sides facing each other. Press the fold to create a crease.

2. Unfold the fabric and fold one corner diagonally, aligning the raw edges of the fabric. The crease you made earlier should be visible and running diagonally across the corner.

3. Measure and mark a line from the corner point to the desired length of the point. This will determine the length of the point on your table runner.

4. Sew along the marked line, starting from the corner point and ending at the desired length. Trim the excess fabric, leaving a 1/4 inch seam allowance.

5. Repeat steps 2-4 for all four corners of the table runner.

6. Once all the corners are sewn, fold the fabric in half lengthwise again, with the right sides facing each other. Pin the sides together, making sure to align the points.

7. Sew along the sides, starting from one end and ending at the other. Trim the excess fabric, leaving a 1/4 inch seam allowance.

8. Turn the table runner right side out and press the seams to create crisp edges.

Mitered corners provide a polished and professional finish to your table runner. They add a decorative touch and can elevate the overall look of your dining table. Whether you're hosting a formal dinner or a casual gathering, a table runner with mitered corners is sure to impress your guests.

2、 Triangle points: Finishing a table runner with pointed ends

Triangle points: Finishing a table runner with pointed ends

To finish a table runner with pointed ends, you can create triangle points that add a stylish and elegant touch to your table decor. Here's a step-by-step guide on how to achieve this look:

1. Measure and cut your fabric: Start by measuring the length of your table runner and adding a few extra inches for the points. Cut your fabric to the desired length and width.

2. Fold and press: Fold the fabric in half lengthwise, with the right sides facing each other. Press the fold to create a crease.

3. Mark the points: On the folded edge, mark the points where you want the triangles to start and end. These points will determine the length and angle of your triangles.

4. Cut the triangles: Using a ruler and fabric scissors, cut from the marked points diagonally towards the folded edge. Make sure to cut through both layers of fabric.

5. Sew the sides: With the right sides still facing each other, sew along the sides of the runner, leaving the triangle points open. Use a 1/4 inch seam allowance and backstitch at the beginning and end of each seam.

6. Trim and turn: Trim the excess fabric from the points, being careful not to cut too close to the stitching. Then, turn the runner right side out and press it flat.

7. Finish the edges: To prevent fraying, you can either use a serger or sew a narrow hem along the edges of the runner. Alternatively, you can use a decorative stitch or bias tape to finish the edges.

8. Press and display: Finally, give your table runner a final press with an iron to ensure it lays flat and looks crisp. Place it on your table and admire your beautifully finished table runner with triangle points.

Adding triangle points to your table runner can elevate its appearance and make it a standout piece in your table decor. Whether you choose a classic or modern fabric, this finishing technique will add a touch of sophistication to any table setting.

3、 Folded points: Creating a pointed edge on a table runner

To finish a table runner with points, one popular method is to create folded points along the edges. This technique adds a decorative touch and gives the runner a polished look. Here's how you can achieve this:

1. Measure and cut your table runner to the desired length. Make sure the width is appropriate for your table.

2. Fold the fabric in half lengthwise, with the right sides facing each other. Press the fold to create a crease.

3. Open up the fabric and fold each long edge towards the center crease, aligning the raw edges. Press the folds to create creases.

4. Fold the fabric in half lengthwise again, with the wrong sides facing each other. The folded edges should be on the inside.

5. Starting from one end, fold the corner diagonally towards the center crease, creating a triangle. The point of the triangle should align with the folded edge.

6. Press the fold to create a crease, and then stitch along the folded edge to secure the point. Repeat this step for the other end of the runner.

7. Trim any excess fabric from the points, leaving a small seam allowance.

8. Turn the runner right side out and press it to give it a crisp finish.

Folded points are a classic way to finish a table runner, but you can also experiment with different shapes and styles. For example, instead of creating triangles, you can make scalloped points or curved points for a more unique look. The choice of fabric and thread color can also greatly impact the overall appearance of the finished table runner.

4、 Scalloped points: Finishing a table runner with decorative edges

Scalloped points: Finishing a table runner with decorative edges

One popular and elegant way to finish a table runner is by adding scalloped points to the edges. This decorative edge adds a touch of sophistication and can elevate the overall look of your table setting. Here's how you can achieve this beautiful finish:

1. Measure and cut: Start by measuring the length of your table runner and determining how many scalloped points you want to add. Once you have the measurements, cut out the fabric accordingly.

2. Create a template: To ensure consistency in the size and shape of your scalloped points, create a template using cardboard or paper. Trace the desired shape onto the template and cut it out.

3. Mark the fabric: Lay your table runner flat and mark the points where you want the scallops to be. Use a fabric pen or chalk to make these marks.

4. Trace the template: Place the template on the fabric, aligning it with the marked points. Trace the shape onto the fabric using a fabric pen or chalk.

5. Cut and sew: Carefully cut along the traced lines, following the shape of the template. Once all the scalloped points are cut, fold the edges under and sew them down using a sewing machine or by hand.

6. Finishing touches: To give your scalloped points a polished look, consider adding a decorative stitch along the edge or using a contrasting thread color. You can also add embellishments like beads or lace to further enhance the design.

The trend in table runner finishes is constantly evolving, and new ideas and techniques are always emerging. Some modern variations of finishing a table runner with points include using asymmetrical shapes or incorporating different fabrics and textures for a unique and contemporary look. Ultimately, the choice of how to finish your table runner with points depends on your personal style and the overall aesthetic you want to achieve.